hello-manufacture,factory,supplier from China

The wood-based panel is formed by interweaving lignocellulose fibers and is made of its inherent adhesive properties. Adhesives and/or additives may be applied during manufacturing.Fiberboard, also known as density board, is a wood-based panel made of wood fiber or other vegetable fibers with urea formaldehyde resin or other applicable adhesives. Adhesives and/or additives may be applied during manufacturing. Fiberboard has the advantages of uniform material, small vertical and horizontal strength difference, and is not easy to crack. It is widely used.

    Fiberboard, also referred to as density board, is a timber-primarily based panel made of wood fiber or exceptional vegetable fibers with urea formaldehyde resin or other relevant adhesives. adhesives and/or additives can be carried out sooner or later of manufacturing. fiberboard has the benefits of uniform , small vertical and horizontal power distinction, and isn't easy to crack. it's miles considerably used.

1. Introduction of MDFMDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.2. MDF sizeThe thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF.

     Particleboard is also called chipboard or flake board. it's a form of timber-primarily based panel fabricated from wood or different lignocellulosic materials and glued beneath warmth and strain after applying adhesive. it is also called particle board. it is specially used in fixtures production and construction enterprise, in addition to train and car carriage production.Advantage of  Particle Board A. suitable sound absorption, sound insulation and heat insulation performance;B.

    OSB board is the upgrading of traditional particle board.

Advantages and disadvantages of density boardadvantage:      1. The MDF surface is flat and easy to paint. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.      2. Density board is another kind of beautiful decorative board, which is better than solid wood furniture in appearance.      3. All kinds of veneer, printed paper, PVC, gummed paper film, melamine impregnated paper and light metal sheet can be decorated on the surface of MDF.      4.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

Particle board is also called chip board or flake board. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Oriented strand board is a new type of high-strength environmental protection board. Under the background of the prominent structural contradiction between the supply and demand of wood in my country and the prevalence of green environmental protection concepts, oriented strand board relies on a wide range of material sources, advanced production technology, and excellent mechanical properties.

1.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

  According to their different densities, they are divided into high-density boards, medium density boards and low-density boards. Due to its soft and high impact strength, the density of the density board is uniform after being pressed, and it is also easy to reprocess. It is a good material for making furniture in foreign countries,but its disadvantage is poor water resistance.

      High-density fiberboard （HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.    The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

Product performance  The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.   The board surface texture is fine and smooth.

     Our maximum important merchandise include: MDF, Finished MDF, HDF, particle board, with many superior imported equipments and production lines, clearly supplying capability now not less than 30000 cubic meters monthly.     All manufacturing nicely adapt to the USA, India, Middle-east, South Asia, Europe, Center & South America, many countries and regions, nicely used and in shape for furnishings, decorations and creation industries.Size1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%T

     Our most vital products include: Particle board, OSB, MDF, HDF,Finished MDF, with many superior imported equipments and manufacturing traces, truly offering capability not less than 30,000 cubic meters monthly.     All production properly adapt to The United States, India, Middle-east, South Asia, Europe, Middle & South America, many nations and areas, well used and in shape for furnishings, decorations and production industries.     We constantly insist on "High-quality first, Service-first" making standard products and comu

Manufacturing Process Broadcast1. Chipping: It is the manufacturing workshop of the raw materials in the whole board production. It mainly cuts loose wood into wood chips that meet the production specifications, so as to provide better conditions for fiber separation in preparation for heat.2. Thermal grinding. The wood chips cut out of the chipping workshop are preheated and cooked, and then mechanically separated to obtain fibers.3. Fiber drying: heat grinding and sizing to make the moisture content of the fiber reach 40%-50%.

Advantages:A. Good sound absorption and sound insulation performance; Thermal insulation and sound absorption of particle board;B. The interior is a cross scattered granular structure, the performance of each part is basically the same, and the lateral bearing weight is relatively poor;C. The surface of particle board is flat and can be used for various veneers;D. In the production process of particle board, the amount of glue used is small, and the environmental protection coefficient is relatively high. Shortcomings:A.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. This kind of man-made board is often used in interior decoration.Xinhua Wood Storage  Quality Certificates  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan.

Particleboard AdvantagesA. Good sound-absorbing and sound-insulating performance; Particleboard is heat-insulating and sound-absorbing;B. The interior is granular with a cross-staggered structure, the performance of each part is basically the same, and the lateral load-bearing capacity is relatively poor;C. The surface of the particle board is smooth and can be used for various veneers;D. In the production process of particleboard, the amount of glue used is small, and the environmental protection factor is relatively high.Particleboard DisadvantagesA.

What is OSB Board?       Oriented strand board (OSB) is a type of engineered wood similar to particle board, formed by adding adhesives and then compressing layers of real wood strands (flakes) in specific orientations.